PDA - E
** This product SKU has recently been discontinued. **
PDA - Economy Series
CCTV 24VAC Multi-Output Power Supplies
The (ES) small enclosure CCTV Power Supplies provide an economical source of centralized 24vac for installations that require 4 to 8 Amps with 4 to 8 outputs. For more power or outputs see our standard or large PDA series. These central outputs can power multiple fixed cameras or pan-tilt cameras with heaters. The table below is a list of standard (ES) configurations with default fuse values. If you wish to use auto resetting circuit breakers, just add a “C” at the end of the part number and we will substitute the equivalent PTC for the fuses. Each PDM-8 output module has a 1500-watt surge protector to help save your cameras from lightning and power surges. The small enclosure has seven (7) combination ½” and ¾” knockouts for ease of installation.
Features
- 2, 4 & 8 Amp Configurations
- 4, 8 & 9 Output Configurations
- using PDM-4, PDM-8 & PDM-9 with Fuses & PTC Circuit Breakers
- Enclosure: 7.6" x 9" x 3.5"D
- Main Power Status LED
- PDM-8's has Surge and Lightning Suppression
- Output Status LED's for Each Output
- Main Fuse/Power Pull or switch
- Transformers are 506
- Line Cord and Wire Nuts Provided
PDA Economy Series Specification and Selection Table
Protected Outputs |
Total Output Amps |
Output Fuses agc/Circuit Breakers |
Output Status LED’s |
Power Required Watts |
Main Fuse ATO/Main with PTC’s |
Main Power LED’s |
Spike and Noise Suppression |
Power Required Watts |
PDA-4EST4 |
4 |
4A |
2A/3A |
Yes |
10A/40A |
Yes |
No |
110W |
PDA-4EST8 |
4 |
8A |
4A/3A |
Yes |
10A/40A |
Yes |
No |
220W |
PDA-8EST4 |
8 |
4A |
2A/.75A |
Yes |
5A/7.5A |
Yes |
Yes |
110W |
PDA-8EST8 |
8 |
8A |
2A/3A |
Yes |
10A/40A |
Yes |
Yes |
220W |
Input: 115-230 VAC available on request. Add “C” to part number for PTC auto-resetting fuses. Line Cord with wire nuts are provided All Outputs are isolated from Primary & Ground Current ratings are continuous 150% brief overloads are allowed for startup