Rack Mount

Rack Mount AC or DC Power supplies 

8 or 16 outputs for Access Control or CCTV

ESD rack mount power supplies are comprised of an all aluminum case and UL506 24VAC transformer or a UL294 12vdc/24vdc off line switching power supply coupled to one or two eight output power distribution boards.

The rack mount enclosure is 13” deep to put the terminals way back for easy access.  The terminal block screws and wire entry are straight in horizontal and un-pluggable for faster installation and service.  The rack mount front and back have a black anodized dress plate.  The Dot above each output pair, indicates the neutral phase for AC and (com-) for DC.

Each group of 8 outputs has a main power status LED along with a green status LED and fuse, replaceable from the front, for each output.
Be sure total continuous current does not exceed the rating of the supply.  See Tech sales for the power source listed below.  All fuses, except PTC models, main and outputs are standard fast acting 5x20mm fuses.

 

Features

  • CCTV 19 Inch Rack Mount with 13 Inches of depth allows for easy service.
  • Output Status LED and Fuse for each Output.
  • Un-pluggable Terminal Blocks with horizontal screw driver and wire entry.
  • Main Power Status LED
  • Custom configurations available
  • Standard IEC 320 AC Power Inlet with Main Fuse and spare.  Line cord provided
  • Black Anodized Front and Back Plates
  • Some models are 
  • Some DC models have Fan
  • All Aluminum case
  • DC Models have terminal strip with connections for Power caution contacts and Stand by Lead Acid Battery(s)

Specifications

  • General Specification
  •     AC input - see selection table - if selectable specify when ordering by default
  •     AC Models Output Voltage (full load 110vac input)  .......................................................     24VAC
  •     AC Models Typical Regulation from no load to full load  ......................................................     15%
  •     Output Current        See Selection Table
  •     Overload Note: The AC models can handle a 200% current Overload for 2 minutes without the
  •     output voltage dropping below 20vac
  •     Operating Temperature range    ...............................................................................   -30o – 120oF
  •     Storage Temperature   .........................................................................................    -50oF to 190oF
  • Power Source Agency Approvals
  •     AC & DC models Dielectric Strength  ...........................................................     2500VRMS Hi-pot
  •     DC models Dielectric Strength .......................................................................      5200VRMS Hi-pot
  •     AC models Transformer Insulation    ....................           ..................   Class B Insulation (266F) min.
  •     All AC transformers UL Recognized to UL 506   .........................................        File# E63829
  •     All AC Transformers CSA certified to C22.2 #66  .......................................      File# LR51265
  •     DC Power sources SPS-20, SPS-5, SPS-5CE, SPS-10, SPS-10CD SPS-6.5, SPS-3.3
  •                        .................................................................................. are all .....  See tech bulletins
  • Indicating LED’s
  •     1 AC Main Power indicator for each group of 8 - shows main is on  ...................................    Green
  •     Output Status indicator - 1 for each output - indicates fuse and power good  .......................    Green
  • Mechanical
  •     Rack Mount Cabinet Size (2 rack high size) Brushed Aluminum  ................   19”W x 3.48”H x 13”D
  •     Front and Black covers are Black Anodized with white screened legend
  •     Weight RMA-1632, 24VAC at 32Amp (Heaviest Unit)  ......................................................     32lbs

Specifications are subject to change without notice